Second Bed Build

Following on from the last bed build (see part 1, part 2), I made a second one. This time a full UK double size rather than a UK small double. As it was a full double I again added the centre 2×4″ and also a centre leg for extra strength.Frame made in the same way as before, 4×1″ for the legs, 2×4″ for the frame and 1×4″ for the slats. Prior to assembly, I cut everything to size, sanded it and varnished with water based polyurethane (dries much faster than oil based).

Continue reading

Wooden speaker brackets from 2×4″ and 2×3″

I wanted to make some speaker brackets for the new (old) mission speakers I acquired for the workshop and having some scrap 2×4″, 2×3″ and MDF, I made up these.

I was inspired by this design from instructables LINK. I choose to amend the design by choosing to use lots of wood glue(!) and mitred some of the edges for aesthetics.

I cut the pieces to size, sanded and fixed with wood screws and lots of wood glue. These will easily support the speakers and I think look good. By cutting the 2×3″ this way it will ensure that there is plenty of room to fix the brackets to the wall either side of the brace. I used two fixings at the top and one fixing at the bottom. This seems to be holding them very securely.

Parts cut

Job done.

Making Ladder Wall Storage Hooks

After buying a new ladder, I needed some brackets to get it off the floor and out of harms way, so I made up some brackets from 2×3″ and chipboard  that I happened to have lying around.

Here they are complete, very simple design fixed with lots of wood glue and 42mm drywall screws. They are secured to the wall with 3 3″x10 screws each.  They have and will hopefully continue to prove capable of supporting the 20kg ladder. To finish I wiped them over with a quick coat of danish oil. Job done.

 

Building a Storage Shelf Unit

I needed some shelves to store the accumulated junk that collects in a garage so to give some room to still make things.

The storage unit was constructed from CLS 2×3” and 12mm MDF. The CLS is more than adequate in strength and the MDF will provide a nice flat surface for the shelves.

I got the 2 full MDF sheets cut into five pieces each so I ended up with 10 pieces approx 485mm by 1220mm. By placing two piece side by side I will have a unit with five shelves 2.4m long with no waste.

CLS Timber 2×3”

Continue reading