Wooden speaker brackets from 2×4″ and 2×3″

I wanted to make some speaker brackets for the new (old) mission speakers I acquired for the workshop and having some scrap 2×4″, 2×3″ and MDF, I made up these.

I was inspired by this design from instructables LINK. I choose to amend the design by choosing to use lots of wood glue(!) and mitred some of the edges for aesthetics.

I cut the pieces to size, sanded and fixed with wood screws and lots of wood glue. These will easily support the speakers and I think look good. By cutting the 2×3″ this way it will ensure that there is plenty of room to fix the brackets to the wall either side of the brace. I used two fixings at the top and one fixing at the bottom. This seems to be holding them very securely.

Parts cut

Job done.

Building a bookcase

Building  a bookcase from pine as a present, here is the finished result:

After looking online for a while I found these plans which looked easy to build and would disassemble for moving.

So after settling on the plans I gathered up the following:

  • 1×9″ PSE Pine x4@ 1.8m
  • 1×4″ PSE Pine x6 @ 900mm
  • M8 300mm Threaded rod
  • M8 Lock Nuts
  • M8 Penny Washers
  • Polyurethane Varnish (oil based)

Continue reading

Cheap Simple Workbench – Every House Needs One! Part 3

Making a Workbench Part 3

Making a Workbench Part 1 is here, Part 2 here, completed (almost) picture here, tools lists here and final finishing here.

Now moving on, I marked up the shorter lower stretchers

Then applying plenty of glue I clamped the longer lower stretchers

Continue reading

Cheap Simple Workbench – Every House Needs One! Part 2

Making a Workbench Part 2

Making a Workbench Part 1 is here, Part 3 here, completed (almost) picture here tools lists here and final finishing here.

I first started by marking up the long sides with four marks to provide a fixing point for the legs and marking four points on the shorted sides – 2 to attach to the sides and 2 to attach to the legs. I marked this up on a template to speed the process up, then piloted drilled and countersunk the holes.


Continue reading

Tools Lists for workbench building

Building a workbench – Tools

Below are three tools lists – List 1 is the absolute minimum list to build a workbench, constructing it with nails, the second build with screws and a very cheap drill and the third with a better drill and some optional items that will make it easier to build and leaves a few tools to use in other projects (for example a 19 drill bit set rather than just one drill bit). They are just to demonstrate that due to the simplicity of construction a workshop full of tools is not required.

I have not used or bought every single item on the lists but from my experience and some rudimentary internet research these look like reasonable items to complete this project.

Continue reading